This gloss improver is a finishing agent for high-end printing that gives printed materials a good appearance, providing decorative and protective effects such as beauty, stain resistance, moisture resistance, etc. It is widely used in the printing industry as a finishing agent.

As is well known, traditional varnish contains a large amount of volatile organic compounds (VOCs), which not only pollute the atmosphere but also seriously affect the health of operators. Therefore, it cannot be used for polishing food packaging products. In the modern era where environmental awareness is increasingly strengthened, the importance of water-based varnish using water as a medium is gradually highlighted, and replacing "oil-based" with "water-based" is the trend in the world for sustainability. 

This gloss booster is environmentally friendly compared to oil-based varnish, and is safer for operators without concerns about flammability or explosion. It is suitable for polishing food packaging. And it has good gloss and quick drying characteristics like oily varnish.

Physical and Chemical Properties

Appearance: milky lotion

Solid content: 38-39%

Viscosity (25℃): 200±50mpa.s

PH value : 7-9

Usage

It can be directly sprayed onto the surface of paper, or  finish the paper by diluting it with water.

Safety Instuction:

Do not dilute with organic solvents such as alcohol. If viscosity needs to be reduced, mix with an appropriate amount of water.

After using this product, the container and tools that come into contact with it should be immediately cleaned with water to avoid sticking and affecting next-time use.

If the viscosity of this product is found to be too low, a small amount of ammonia water can be used for adjustment.

After using this product, the container should be sealed to prevent it from deteriorating due to contact with air.

When hands, other parts of the body, clothing, or other items come into contact with the product,  immediately wash with water.