Features

1) This product is anionic and suitable for sizing paper and cardboard made from waste pulp or wood pulp in acidic and weakly acidic environments.

2) Even when there are changes in the copying conditions (pH, amount of aluminum sulfate added, pulp type), it still maintains a stable sizing effect.

3) Maintain good sizing effect under closed (recycled use of white water) copying conditions.

4) Compared with ordinary anionic rosin sizing agents, the sizing efficiency is higher.

5) The applicable pH range is 4.0-6.5, and the optimal pH range is 4.5-6.0.

Physical and Chemical Properties

Appearance:...............................  milky white emulsion

Solid content %........................ 40±2%

PH value....................3±1

(1) The above characteristics represent typical values for this product. For the latest values and complete data, please refer to the Material Safety Data Sheet (MSDS)

(2) This is not an acceptance criterion for the product. If needed, we can provide one specific product acceptance criteria.

Usage

1) When diluting the product, please use ordinarily clean water and do not use unclean water such as white water.

2) Suitable for both intermittent and continuous addition. The adding position should be chosen where it can be fully mixed with the slurry. Generally, it is recommended to add it in the batching tank or the headbox (intermittent addition is recommended to be added in the slurry tank, and continuous addition is recommended to be added in the high-level tank or the slurry box).

3) Do not mix with other chemicals, especially cationic chemicals.

4) The product has a storage period of 3 months. Expired products may result in a decrease in quality. Please note that.

5) The product is non-toxic. If it comes into contact with the skin, please wash it with water or peel it off after it dries. If in contact with eyes, wash with tap water and have a doctor check. If you accidentally drink it, spit it out and go to the hospital for examination.